Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Toyota Logo

Toyota Sienna Key Fobs


Discount Sienna Keyless Entry Remotes


If you are in need for a Toyota Sienna keyless entry remote, Keyless Remote Fobs is glad to help. These Toyota Sienna key fobs are much less money than most Toyota dealerships. Purchase one of these Toyota Sienna remotes!


Please check back in a few days if you're not seeing what you wanted.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
1998 GQ43VT7T NA
1998 - 2000 BAB237131-022, BAB237131-056 08191-00871, PT398-07101
1999 - 2003 GQ43VT14T 89742-06010, 89742-20200
2001 BAB237131-056 08191-00922
2004 - 2009 GQ43VT20T NA


We have added this table in an effort to provide our customers with the most information possible to be able to correctly identify the right key fob for their vehicle. Please let us know if your current remote FCC ID or part number isn't shown.
Dealership Website [Visit Site]


Programing InstructionsToyota Sienna Key Fob Programming Instructions
Not all key fobs are difficult to reprogram. Below you'll find a list of available remote programming directions that you can often times do yourself in only a few minutes. Save money by doing it yourself.

2004, 2005, 2006, 2007, 2008, 2009, 2010
Begin with: The driver's door open and unlocked. Key out of the ignition.

1. Insert and remove the key from the ignition switch 2 times within 5 seconds.

NOTE: Steps 2 and 3 should be performed within 40 seconds.

2. Close and open driver's door TWICE.

3. Insert the key into the ignition and remove it.

NOTE: Steps 4 - 6 should be performed within 40 seconds.

4. Close and open the driver's door twice.

5. Insert the key into the ignition.

6. Close the door.

NOTE: Steps 5 and 6 should be reversed for the following models ONLY (close door first, then insert key into ignition):

2000 - 2005 Celica
2001 - 2003 Prius
2001 - 2005 ECHO
2001 - 2005 RAV4
2003 - 2004 Avalon

7. Turn the ignition switch from Lock to On and back to Lock at about 1 second intervals to select the desired mode:

1 time for ADD mode.
2 times for REWRITE mode.
3 times for CONFIRMATION mode.
5 times for PROHIBITION mode.
8. Remove the key from the ignition.

9. To confirm your mode selection, the power locks will now cycle lock to unlock a number of times corresponding to your key cycles in step 7.

NOTE: If Confirmation or Prohibition modes have been selected, opening the door will complete the procedure.

10. For Add or Rewrite modes do the following within 40 seconds of Door

Procedure Lock confirmation:

A. Press both car transmitter Lock and Unlock buttons simultaneously between 1 and 1.5 seconds and release.
B. Within 3 seconds of step A, press the transmitter Lock button for more than 1 second and release.
If the keyless entry remote transmitter has been successfully programmed, the power locks will cycle lock to unlock once at this time.

If there are problems with the remote transmitter or the procedure up to this point, the locks will cycle twice. If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure.

C. If multiple remotes are to be reprogrammed, repeat steps A and B.

11. Open the driver's door to conclude programming mode.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.


No comments have been submitted. Add yours today!

 
Name:
Comment:
Verification Code:
 

<<- Toyota Sequoia Keyless RemotesToyota Solara Keyless Remotes ->>