Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Toyota Logo

Toyota Highlander Key Fobs


Discount Highlander Keyless Entry Remotes


Vehicle accessories like Toyota Highlander keyless entry remotes can be pricey. Save up to half the price of dealer remotes and purchase your used or aftermarket Toyota Highlander key fob today!


The list above is constantly changing. Check back soon for more updates.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
2001 - 2007 HYQ12BAN, HYQ12BBX 89742-20200, 89742-0C020, 89742-42120
2008 - 2009 GQ43VT20T NA


We have added this table in an effort to provide our customers with the most information possible to be able to correctly identify the right key fob for their vehicle. Please let us know if your current remote FCC ID or part number isn't shown.
Dealership Website [Visit Site]


Programing InstructionsToyota Highlander Key Fob Programming Instructions
Need help or directions to program your key fob? Below are some instructions on how to program your stock remote. Many times, reprogramming will only take a few minutes to complete and is a fairly easy process.

2001, 2002, 2003, 2004, 2005, 2006, 2007
Begin with: The driver's door open and unlocked. Key out of the ignition.

1. Insert and remove the key from the ignition switch 2 times within 5 seconds.

NOTE: Steps 2 and 3 should be performed within 40 seconds.

2. Close and open driver's door TWICE.

3. Insert the key into the ignition and remove it.

NOTE: Steps 4 - 6 should be performed within 40 seconds.

4. Close and open the driver's door twice.

5. Insert the key into the ignition.

6. Close the door.

NOTE: Steps 5 and 6 should be reversed for the following models ONLY (close door first, then insert key into ignition):

2000 - 2005 Celica
2001 - 2003 Prius
2001 - 2005 ECHO
2001 - 2005 RAV4
2003 - 2004 Avalon

7. Turn the ignition switch from Lock to On and back to Lock at about 1 second intervals to select the desired mode:

1 time for ADD mode.
2 times for REWRITE mode.
3 times for CONFIRMATION mode.
5 times for PROHIBITION mode.
8. Remove the key from the ignition.

9. To confirm your mode selection, the power locks will now cycle lock to unlock a number of times corresponding to your key cycles in step 7.

NOTE: If Confirmation or Prohibition modes have been selected, opening the door will complete the procedure.

10. For Add or Rewrite modes do the following within 40 seconds of Door

Procedure Lock confirmation:

A. Press both car transmitter Lock and Unlock buttons simultaneously between 1 and 1.5 seconds and release.
B. Within 3 seconds of step A, press the transmitter Lock button for more than 1 second and release.
If the keyless entry remote transmitter has been successfully programmed, the power locks will cycle lock to unlock once at this time.

If there are problems with the remote transmitter or the procedure up to this point, the locks will cycle twice. If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure.

C. If multiple remotes are to be reprogrammed, repeat steps A and B.

11. Open the driver's door to conclude programming mode.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.

Charles says:
08-26-2013
I purchased a keyless fob for my 2008 Highlander from another company I do not remember. I took it to my dealer and they could not (would not) program it to start my vehicle. Who will tell me what/how to program this FOB.
 
Troy says:
09-09-2013
I have a key but need a remote for a 2008 Highlander. Do your remotes for that year come with instructions for programming, or do I need to go to the dealer to have it programmed?
 

 
Name:
Comment:
Verification Code:
 

<<- Toyota FJ Cruiser Keyless RemotesToyota Land Cruiser Keyless Remotes ->>