Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Toyota Logo

Toyota 4Runner Key Fobs


Discount 4Runner Keyless Entry Remotes


Give these Toyota 4Runner key fobs a try. Many of these remotes are brand new or gently used. Some of them are even factory models. Search below for a little bit of everything. No matter if you’re trying to replace the remote you have or just get an extra one for backup or for someone else to use, you’ve come to the right place. Get your remote today!


Not seeing what you are looking for? Check back in a few days.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
1990 - 1997 BAB237131-022 08191-00870, PT398-07100
1998 - 1999 BAB237131-022, BAB237131-056 08191-00871, PT398-07101
1999 - 2004 HYQ1512Y 89742-35021
2000 - 2002 BAB237131-056 08191-00922
2005 - 2009 HYQ12BBX, HYQ12BAN NA


We have added this table in an effort to provide our customers with the most information possible to be able to correctly identify the right key fob for their vehicle. Please let us know if your current remote FCC ID or part number isn't shown.
Dealership Website [Visit Site]


Programing InstructionsToyota 4Runner Key Fob Programming Instructions
Need to program or reprogram your key fob? You're in luck because here are some available key fob programming instructions that will work with your vehicle. It should only take you a few minutes and most are fairly easy to do.

1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Begin with: The driver's door open and unlocked. Key out of the ignition.

1. Insert and remove the key from the ignition switch 2 times within 5 seconds.

NOTE: Steps 2 and 3 should be performed within 40 seconds.

2. Close and open driver's door TWICE.

3. Insert the key into the ignition and remove it.

NOTE: Steps 4 - 6 should be performed within 40 seconds.

4. Close and open the driver's door twice.

5. Insert the key into the ignition.

6. Close the door.

NOTE: Steps 5 and 6 should be reversed for the following models ONLY (close door first, then insert key into ignition):

2000 - 2005 Celica
2001 - 2003 Prius
2001 - 2005 ECHO
2001 - 2005 RAV4
2003 - 2004 Avalon

7. Turn the ignition switch from Lock to On and back to Lock at about 1 second intervals to select the desired mode:

1 time for ADD mode.
2 times for REWRITE mode.
3 times for CONFIRMATION mode.
5 times for PROHIBITION mode.
8. Remove the key from the ignition.

9. To confirm your mode selection, the power locks will now cycle lock to unlock a number of times corresponding to your key cycles in step 7.

NOTE: If Confirmation or Prohibition modes have been selected, opening the door will complete the procedure.

10. For Add or Rewrite modes do the following within 40 seconds of Door

Procedure Lock confirmation:

A. Press both car transmitter Lock and Unlock buttons simultaneously between 1 and 1.5 seconds and release.
B. Within 3 seconds of step A, press the transmitter Lock button for more than 1 second and release.
If the keyless entry remote transmitter has been successfully programmed, the power locks will cycle lock to unlock once at this time.

If there are problems with the remote transmitter or the procedure up to this point, the locks will cycle twice. If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure.

C. If multiple remotes are to be reprogrammed, repeat steps A and B.

11. Open the driver's door to conclude programming mode.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.

Gina says:
09-09-2013
Need Remote - Current Toyota Part Number: 08191-00922, FCC ID on the back of remote: BAB237131-056
 

 
Name:
Comment:
Verification Code:
 

 Toyota Avalon Keyless Remotes ->>