Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Oldsmobile Logo

Oldsmobile Bravada Key Fobs


Discount Bravada Keyless Entry Remotes


Don't be afraid to buy an extra Oldsmobile Bravada keyless entry remote or replace one that stopped working. You can get Oldsmobile Bravada key fobs for much less than at the dealers. Obtain one of these Oldsmobile Bravada remotes today.


Please check back in a few days if you're not seeing what you wanted.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
1991 - 1996 ABO0103T, ABO0104T 15692636, 15955515, 15955516, 25555951, 15692336, 10239647, 25559364, 25609144, 15657587, 15955702, 15731442, 15725423, 15692636
1997 AB01502T 16245100-29, 16207901-5, 16245105
1998 - 2001 KOBUT1BT 15732805
2002 - 2004 MYT3X68988, MYT3X6898B 15008008, 15008009, 15051014


Feel free to contact us if you don't see the correct key fob part numbers or let us know what you are looking for and what is on the back of the remote you are trying to replace. We'll add it to our table in an attempt to help our other customers out.
Dealership Website [Visit Site]


Programing InstructionsOldsmobile Bravada Key Fob Programming Instructions
Save time and money by programming or reprogramming your key fob for your. You'll find the available programming instructions for your year, make and model remote below and it should only take you a few minutes to complete.

2002, 2003, 2004
IMPORTANT: Before entering programming mode, have in possession all of the GM remote transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory if not reprogrammed during the same programming procedure. The other transmitters will not be functional until you program the transmitters again with new remote.

1. Close all vehicle doors.

2. Insert the key into the ignition.

3. Hold down the power UNLOCK button on the driver's door panel and -continue to hold down until instructed to release.

4. Perform steps 5 through 8 in fairly rapid succession.

5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6. Turn the ignition switch to the OFF position.

7. Turn the ignition switch to the ON position.

8. Turn the ignition switch to the OFF position.

9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically to confirm remote programing or learning mode.

10. Hold down the LOCK and UNLOCK buttons on the remote transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.

11. Repeat the previous step for each additional car transmitter (including any existing transmitters).

12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.


No comments have been submitted. Add yours today!

 
Name:
Comment:
Verification Code:
 

<<- Oldsmobile Aurora Keyless RemotesOldsmobile Cutlass Keyless Remotes ->>