Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Nissan Logo

Nissan Pathfinder Key Fobs


Discount Pathfinder Keyless Entry Remotes


If you've shopped around for Nissan Pathfinder keyless entry remotes you know they're a pricey accessory. Purchase your Nissan Pathfinder key fob here at sometimes more than half the price. Get a Nissan Pathfinder remote today!


Please check back in a few days if you're not seeing what you wanted.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
1996 - 1999 KOBUTA3T NA
1999 - 2001 KBRASTU10, KBRASTU09 NA
2002 - 2005 KBRASTU15 28268-5W501, 28268-5W500, 28268-7Z800, 28268-C990A
2006 - 2011 CWTWB1U415, CWTWB1U733 28268EA, 28268EZ, 28268-EA000


Feel free to contact us if you don't see the correct key fob part numbers or let us know what you are looking for and what is on the back of the remote you are trying to replace. We'll add it to our table in an attempt to help our other customers out.
Dealership Website [Visit Site]


Programing InstructionsNissan Pathfinder Key Fob Programming Instructions
Need help or directions to program your key fob? Below are some instructions on how to program your stock remote. Many times, reprogramming will only take a few minutes to complete and is a fairly easy process.

1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
PLEASE READ CAREFULLY BEFORE TRYING! IF AT anytime YOU MAKE A MISTAKE, START AND STOP YOUR CAR, EXIT THE VEHICLE AND START OVER. THE REMOTE CAN BE ONLY PROGRAMMED WITH A MASTER KEY.

1.SIT IN CAR WITH DOORS AND WINDOWS CLOSED.

2.LOCK DOORS WITH POWER DOOR LOCK SWITCH ON DRIVER'S DOOR.

3.PUT IN AND PULL OUT KEY FROM IGNITION APPROX. 8 TIMES OR UNTIL YOU SEE THE HAZARD/TURN SIGNAL LIGHTS FLASH.(older models lights may flash after 4 or 5 times) YOU NEED TO DO THAT IN LESS THEN 10 SEC.

4.WHEN HAZARD LIGHTS FLASH (ON 2005 AND NEWER MODELS THE GAUGE NEEDLES MAY JUMP A LITTLE INSTEAD), PUT KEY IN IGNITION AND TURN TO THE ACC POSITION.(when your hazard lights flash your car is sending a signal to be received by the remote).

5.PRESS LOCK BUTTON ON THE NEW REMOTE TRANSMITTER, LIGHTS SHOULD FLASH AGAIN.

IF YOU HAVE 2 REMOTES, 1 NEW AND 1 OLD OR 2 NEW ONES, PLEASE CONTINUE WITH STEPS 6 AND 7. IF NOT, SKIP TO END.

6.PRESS UNLOCK BUTTON ON DRIVER'S DOOR, THEN LOCK BUTTON ON DRIVERS DOOR, LIGHTS WILL AGAIN FLASH.

7.PRESS LOCK BUTTON ON 2ND NEW OR OLD REMOTE. LIGHTS AGAIN WILL FLASH.

YOU ARE DONE. EXIT VEHICLE AND TRY YOUR REMOTE. IT WILL NOT WORK FROM INSIDE CAR OR WITH KEY IN IGNITION.

Note: if your hazard lights flash after inserting your key in and out, but you can't get the remote to program, you may have a dead battery or the wrong remote. If instructions do not work, do it again but when you get in - shut the door, buckle seat belt and lock doors, then proceed to put key in ignition



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.

Roy says:
09-04-2013
I need a keyfob and a key for my 2003 pathfinder. 1. Are the keys precut? 2. Is it easy to program the keyfob? 3. How for both the keyfob and the key?
 
Bill says:
09-19-2013
What a sigh of relief. I thought a new fob would cost an arm and a leg and I would have to take it in to the dealer to program. Good news, neither were true. They don't cost that much and I programmed it myself. Phew!
 
Glen says:
11-06-2013
Do you have any thoughts on where I can get the keyless remote module that goes under the drivers seat? I can't find one anywhere. I have a 1995 nissan pathfinder XE 4WD 3.0 liter engine.
 

 
Name:
Comment:
Verification Code:
 

<<- Nissan Murano Keyless RemotesNissan Quest Keyless Remotes ->>