Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Infiniti Logo

Infiniti G35 Key Fobs


Discount G35 Keyless Entry Remotes


Most all vehicles, including the Infiniti G35, come standard with keyless entry remotes. Infiniti G35 key fobs are expensive to replace but you'll find your Infiniti G35 keyless remote here for much less.


The list above is constantly changing. Check back soon for more updates.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
2003 - 2007 KBRASTU15 28268-C991A, 28268-C991C, 28268-5Y701, 28268-ZB700
2005 - 2007 KBRTN001 285E3-AC70D
2007 - 2008 KR55WK48903 285E3-JK62A


We will add your remote information if it is not listed above. Just contact us or comment below to send us a message. Having the most up to date and accurate remote information is important to us and we strive to provide our customers with the most information possible. Let us know.
Dealership Website [Visit Site]


Programing InstructionsInfiniti G35 Key Fob Programming Instructions
If you're purchasing a new remote and don't know how to program it or you just need to get it working after a battery change, here are some key fob programming instructions to help you get started. You should be back working in no time.

2003, 2004, 2005
1. Sit in the car with doors and windows closed.

2. Lock doors with power door lock switch on driver's door.

3. Put in and pull out the key from ignition approx. 8 times or until you see the hazard/turn signal lights flash.(older models lights may flash after 4 or 5 times) you need to do that in less than 10 sec

4. When hazard lights flash (on 2005 and newer models the gauge needles may jump a little instead), put the key in the ignition and turn to the acc position.(when your hazard lights flash your car is sending a signal to be received by the remote)

5. Press lock button on the new remote, lights should flash again.

If you have 2 remotes, 1 new and 1 old or 2 new ones, please continue with steps 6 and 7. If not, skip ending.

6. Press unlock button on driver's door, then lock button on drivers door, lights will again flash

7. Press lock button on 2nd new or old Infiniti remote transmitter. Lights again will flash.

You are done. Exit vehicle and try your remote. It will not work from inside car or with the key in the ignition.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.


No comments have been submitted. Add yours today!

 
Name:
Comment:
Verification Code:
 

<<- Infiniti G20 Keyless RemotesInfiniti G37 Keyless Remotes ->>