Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Infiniti Logo

Infiniti FX35 Key Fobs


Discount FX35 Keyless Entry Remotes


Give these Infiniti FX35 key fobs a try. Many of these remotes are brand new or gently used. Some of them are even factory models. Search below for a little bit of everything. No matter if you’re trying to replace the remote you have or just get an extra one for backup or for someone else to use, you’ve come to the right place. Get your remote today!


Not seeing what you are looking for? Check back in a few days.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
2003 KBRASTU15 28268-5W501, 28268-5W500, 28268-7Z800, 28268-C990A 
2003 - 2004 NHVWBU612 285E3-CG025, 285E3-CG010
2004 - 2008 KBRASTU15 28268-ZE10B
2005 - 2008 CWTWBU619 285E3-CL01D
2009 - 2010 KR55WK49622 285E3-1BA2A


We will add your remote information if it is not listed above. Just contact us or comment below to send us a message. Having the most up to date and accurate remote information is important to us and we strive to provide our customers with the most information possible. Let us know.
Dealership Website [Visit Site]


Programing InstructionsInfiniti FX35 Key Fob Programming Instructions
Need to program or reprogram your key fob? You're in luck because here are some available key fob programming instructions that will work with your vehicle. It should only take you a few minutes and most are fairly easy to do.

2004, 2005, 2006, 2007
1. Sit in the car with doors and windows closed.

2. Lock doors with power door lock switch on driver's door.

3. Put in and pull out the key from ignition approx. 8 times or until you see the hazard/turn signal lights flash.(older models lights may flash after 4 or 5 times) you need to do that in less than 10 sec

4. When hazard lights flash (on 2005 and newer models the gauge needles may jump a little instead), put the key in the ignition and turn to the acc position.(when your hazard lights flash your car is sending a signal to be received by the remote)

5. Press lock button on the new remote, lights should flash again.

If you have 2 remotes, 1 new and 1 old or 2 new ones, please continue with steps 6 and 7. If not, skip ending.

6. Press unlock button on driver's door, then lock button on drivers door, lights will again flash

7. Press lock button on 2nd new or old Infiniti remote transmitter. Lights again will flash.

You are done. Exit vehicle and try your remote. It will not work from inside car or with the key in the ignition.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.


No comments have been submitted. Add yours today!

 
Name:
Comment:
Verification Code:
 

<<- Infiniti EX35 Keyless RemotesInfiniti FX45 Keyless Remotes ->>