Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Ford Logo

Ford Explorer Key Fobs


Discount Explorer Keyless Entry Remotes


Ford Explorer keyless remotes are vehicle accessories that don't have to be replaced too often. Be smart and save money by purchasing your replacement Ford Explorer key fobs here today!


We are constantly changing in the above list. Revisit us for more options.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
1993 - 1997 GQ43VT4T 3165189, F6UZ-15K601-AB
1998 - 2001 CWTWB1U345, CWTWB1U331, CWTWB1U212, GQ43VT11T F8DB-15K601-AA, 2L3T-15K601-AA, 2L3T-15K601-AB, 8L3Z-15K601-AA
2002 - 2008 CWTWB1U331, CWTWB1U551 2L2T-15K601-BA, 3L7T-15K601-AA
2002 - 2009 CWTWB1U345, CWTWB1U331, CWTWB1U322 1L2T-15K601-AA, 2L2T-15K601-BA, 2L3T-15K601-AA, 2L2Z-15K601-BA, 8S4Z-15K601-AA


The above chart has been added as an aid to help you choose which key fob or remote will work best with your make and model of your vehicle. We strive to keep all our information as current and accurate as possible. Let us know if we missed adding your key fob information or if you see something that is not correct.
Dealership Website [Visit Site]


Programing InstructionsFord Explorer Key Fob Programming Instructions
Need to program or reprogram your key fob? You're in luck because here are some available key fob programming instructions that will work with your vehicle. It should only take you a few minutes and most are fairly easy to do.

1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
1) Turn ignition from OFF to RUN (as far as you can go without cranking the engine) 8 times (one turn is from OFF to RUN and back to OFF) within 10 seconds, with the 8th time ending in RUN (8th time you only go from OFF to RUN and stop there) (do not start the engine).

2) All doors will lock then unlock to confirm programming mode.

3) Within 20 seconds, press any button on 1st car remote transmitter. Door locks will cycle to confirm remote programming.

4) Within 20 seconds, press any button on 2nd transmitter (up to 4 transmitters total possible). You have to press a button on every remote you have, including all the working original remotes if available.

5) Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.

Kev says:
09-15-2013
Hi I after the same remote for my 98 ford explorer in australaia the back has this number on the back F8D8-15K601-EA WILL YOURS REPLACE MINE
 
explorer XLT says:
06-15-2017
I need a key plus a remote
 

 
Name:
Comment:
Verification Code:
 

<<- Ford Expedition EL Keyless RemotesFord Explorer Sport Keyless Remotes ->>