Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Chevy Logo

Chevy Trail Blazer Key Fobs


Discount Trail Blazer Keyless Entry Remotes


Let your friends and family know that Chevy Trail Blazer key fobs are much cheaper online and here at Keyless Remote Fobs. Purchase a factory / aftermarket new or used Chevy Trail Blazer keyless remote now!


We are constantly changing in the above list. Revisit us for more options.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
2002 - 2009 MYT3X68988 15008008, 15008009, 15051014


Not seeing your remote part number or FCC ID? Let us know what is missing and we'll add it to our site to help aid the search of our other visitors. We strive to be the best one stop site for all your key fob information.
Dealership Website [Visit Site]


Programing InstructionsChevy Trail Blazer Key Fob Programming Instructions
Not all key fobs are difficult to reprogram. Below you'll find a list of available remote programming directions that you can often times do yourself in only a few minutes. Save money by doing it yourself.

2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
IMPORTANT: Before entering programming mode, have in possession all of the GM remote transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory if not reprogrammed during the same programming procedure. The other transmitters will not be functional until you program the transmitters again with new remote.

1. Close all vehicle doors.

2. Insert the key into the ignition.

3. Hold down the power UNLOCK button on the driver's door panel and -continue to hold down until instructed to release.

4. Perform steps 5 through 8 in fairly rapid succession.

5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6. Turn the ignition switch to the OFF position.

7. Turn the ignition switch to the ON position.

8. Turn the ignition switch to the OFF position.

9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically to confirm remote programing or learning mode.

10. Hold down the LOCK and UNLOCK buttons on the remote transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.

11. Repeat the previous step for each additional car transmitter (including any existing transmitters).

12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.


No comments have been submitted. Add yours today!

 
Name:
Comment:
Verification Code:
 

<<- Chevy Tracker Keyless RemotesChevy Traverse Keyless Remotes ->>