Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Chevy Logo

Chevy Suburban Key Fobs


Discount Suburban Keyless Entry Remotes


Buy a new or used Chevy Suburban keyless remote today! Most all the listed prices will beat dealership quotes on Chevy Suburban key fobs. Purchase your Chevy Suburban keyless remote for much less and even program it yourself.


We are constantly changing in the above list. Revisit us for more options.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
1995 - 1996 ABO0104T 15725423, 15955515
1995 - 1996 ABO0103T or ABO0104T 15725423, 15692636, 15955515, 15955516, 25555951, 15692336, 10239647, 25559364, 25609144, 15657587, 15955702, 15731442
1997 - 1999 ABO1502T 16245105, 16245100-29, 16207901-5
1999 AB01502T 16245100, 16245100-29 or 16207901-5
2000 - 2001 KOBUT1BT 15732803
2001 - 2002 KOBLEAR1XT 15042968
2003 - 2006 LHJ011 15186203, 21997127, 15186200, 15186201, 15132197, 15132198, 10377295, or 22730827
2007 - 2010 OUC 60270 15857840, 15913427, 15857839, 25839476, 15916016, 15913415, 15913418, 15857836, 25830632, 15916015, 15913416, 15857835


Not seeing your remote part number or FCC ID? Let us know what is missing and we'll add it to our site to help aid the search of our other visitors. We strive to be the best one stop site for all your key fob information.
Dealership Website [Visit Site]


Programing InstructionsChevy Suburban Key Fob Programming Instructions
Save time and money by programming or reprogramming your key fob for your. You'll find the available programming instructions for your year, make and model remote below and it should only take you a few minutes to complete.

2000, 2001, 2002, 2003, 2004, 2005, 2006
IMPORTANT: Before entering programming mode, have in possession all of the GM remote transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory if not reprogrammed during the same programming procedure. The other transmitters will not be functional until you program the transmitters again with new remote.

1. Close all vehicle doors.

2. Insert the key into the ignition.

3. Hold down the power UNLOCK button on the driver's door panel and -continue to hold down until instructed to release.

4. Perform steps 5 through 8 in fairly rapid succession.

5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6. Turn the ignition switch to the OFF position.

7. Turn the ignition switch to the ON position.

8. Turn the ignition switch to the OFF position.

9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically to confirm remote programing or learning mode.

10. Hold down the LOCK and UNLOCK buttons on the remote transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.

11. Repeat the previous step for each additional car transmitter (including any existing transmitters).

12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

2007, 2008, 2009, 2010
Switch ignition ON.

Repeatedly press vehicle information button (it is usually located on the right or left from the steering column depending on year make and model) Fig. 2 [A] until PRESS TO RELEARN REMOTE KEY is displayed.

Press set/reset button Fig. 2 [B] until REMOTE KEY LEARNING ACTIVE is displayed.

Programming mode activated, proceed as follows:

Press and hold LOCK and UNLOCK remote buttons on first remote transmitter simultaneously for 15 seconds.

Wait for acoustic signal (indicates correct programming).

Repeat above procedure to program remaining remote transmitters.

Switch ignition OFF to exit programming mode.

Remote transmitters can also be programmed using diagnostic equipment.

NOTE: A maximum of 8 remote transmitters can be programmed.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.

Shaun says:
12-04-2015
Would I be able to program a remote myself for a 2012 suburban or do I need to go to a dealer? Thank you for your response. skip500@hotmail.com
 

 
Name:
Comment:
Verification Code:
 

<<- Chevy SSR Keyless RemotesChevy Tahoe Keyless Remotes ->>