Keyless Remote FobsKeyless Remote Fobs  
Main PageAll VehiclesSearch Chevy Logo

Chevy Blazer Key Fobs


Discount Blazer Keyless Entry Remotes


Did your Chevy Blazer keyless remote stop working or get lost? No problem because you'll find great prices on these replacement Chevy Blazer key fobs. Buy your Chevy Blazer keyless entry remote today!


The list above is constantly changing. Check back soon for more updates.

Vehicle Years Key Fob FCC IDs Remote Part Numbers
1993 - 1996 ABO0103T or ABO0104T 15725423, 15692636, 15955515, 15955516, 25609144, 25555951, 15692336, 10239647, 25559364, 25609144, 15657587, 15955702, 15731442
1997 ABO1502T 16245105, 16245100-29, 16207901-5
1998 - 2001 KOBUT1BT 15732805
2001 - 2005 KOBLEAR1XT 15043458


Not seeing your remote part number or FCC ID? Let us know what is missing and we'll add it to our site to help aid the search of our other visitors. We strive to be the best one stop site for all your key fob information.
Dealership Website [Visit Site]


Programing InstructionsChevy Blazer Key Fob Programming Instructions
Need to program or reprogram your key fob? You're in luck because here are some available key fob programming instructions that will work with your vehicle. It should only take you a few minutes and most are fairly easy to do.

1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
IMPORTANT: Before entering programming mode, have in possession all of the GM remote transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory if not reprogrammed during the same programming procedure. The other transmitters will not be functional until you program the transmitters again with new remote.

1. Close all vehicle doors.

2. Insert the key into the ignition.

3. Hold down the power UNLOCK button on the driver's door panel and -continue to hold down until instructed to release.

4. Perform steps 5 through 8 in fairly rapid succession.

5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6. Turn the ignition switch to the OFF position.

7. Turn the ignition switch to the ON position.

8. Turn the ignition switch to the OFF position.

9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically to confirm remote programing or learning mode.

10. Hold down the LOCK and UNLOCK buttons on the remote transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.

11. Repeat the previous step for each additional car transmitter (including any existing transmitters).

12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.



Comments:
Leave us a comment if you're not finding what you need or would like to share some information about your vehicle's remote. We'd like to keep our site updated with all the latest information so if you see an error, let us know.

Steph says:
08-07-2015
I was a little concerned when my key fob died (I use it a lot). I was glad it was just a battery and all I had to do is reprogram it. Didn't take long at all and the instructions were very clear. Thanks.
 

 
Name:
Comment:
Verification Code:
 

<<- Chevy Aveo5 Keyless RemotesChevy Camaro Keyless Remotes ->>